BNF FPV | iFlight Titan Chimera7 HD | 6S | 1300kv | Long Range | 7-Inch | Caddx Polar Air Unit | TBS Crossfire

The iFlight Chimera7 HD quadcopter is a 7 inch, long distance 1300kv BNF drone designed to carry large batteries for extended FPV flight times (even up to 6S2P, 6000mAh). The stiff deadcat frame is designed for minimal resonance and for your props to not show in the footage.

Equipped with Caddx Polar FPV Air Unit, TBS Crossfire, 2806.5 motors, 7-inch propellers for super stable flying and a pre-installed GPS for Betaflight rescue mode. Vertical and horizontal TBS Crossfire antenna mounts are included, as-well as a GoPro universal TPU bottom stand.

Click here for iFlight Chimera7 1800kv

Australian Stock and Free Shipping.

In the Box

• 1x Chimera7 frame
• 1x GoPro TPU bottom stand incl. lock screw
• 1x Caddx Polar Air Unit
• 1x TBS Crossfire
• 2x Albatross LHCP RP-SMA 5.8g 150mm antenna
• 2 sets x Gemfan tri-blade 7040 props (Set of 4 - Colour may vary)
• 4x 20 x 250mm Microfiber PU Leather Battery Strap (Colour May Vary)

Recommended Chimera7 Accessories

PRE-TUNED & PRE-SETUP:

A basic PID- and Filter tuning has been pre-applied by iFlight.

FRAME: Chimera7

• Wheelbase: 320mm
• Main body dimension: 285 x 199mm
• Bottom to top distance: 20mm
• Arm thickness: 6mm
• Bottom plate thickness: 3mm
• Top plate thickness: 2mm
• Upper(middle) plate thickness: 3mm
• Camera plate thickness: 3mm (included TPU inserts)

Flight Controller| SucceX-D F7 V2.2

• MCU: STM32 F722
• Gyro：ICM20689
• Blackbox：32MB
• BEC: 5V 2.5A / 9V 2.5A
• Current sensor scale: 100
• Beeper pad : Yes
• UARTs：4
• Motor outputs: 8
• Uart:4*UART(UART1、UART2、UART4、UART5)
• UART1 for Receiver
• UART2for VTX HD/Analog Telemetry
• UART4 for GPS or other sensors that require a serial port
• UART5 for ESC Telemetry
• 1×SH1.0 8pin connector for ESC（GND/BAT/M1/M2/M3/M4/CUR/R5)
• 1xSH1.0 6pin connector for Any Receiver or DJI（R1/GND/R2/T2/GND/+9V）
• Firmware target: IFLIGHT_F722_TWING
• Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ4mm
• USB type-C

ESC | SucceX 50A

• MCU: STM32F051
• Up tp 48kHz PWM frequency
• Capacitance: 470uF/50V
• Current Sensor: Yes
• Input: 2-6S LIPO
• Constant: 50A / Burst: 60A
• BlHeli32 telemetry: Yes
• BEC: No
• Supports up to Dshot1200, Proshot, Oneshot, Multishot 
• Target: iFlight-BL32-4IN1
• Weight: 14.4g
• Mounting pattern: 30.5 x 30.5mm/Φ3mm
• Dimensions: 43 x 39mm (including the power pads)

 HIGHLIGHTS:

• 6mm rigid arm design for more stiffness
• Top- and bottom battery mount option
• XING 1300KV 2806.5 efficient wide stator motors
• GPS pre-installed for more safety at distance
• GoPro TPU bottom stand (GoPro protector not included)
• 360° TPU protection, DJI cam protection and antenna mounts
• Caddx Polar DJI FPV Air Unit, buttery-smooth 720p\120fps FPV feed (TPU soft mounted) 
• No props in view (DJI Air unit record in 1080p/60fps)
• Battery voltage LED status light (illuminated IF logo on the bottom)