Free Shipping on everything Australia wide (excluding backpacks) when you spend over $99!


Add your deal, information or promotional text

BNF FPV | iFlight Chimera7 HD | 6S | 1800kv | Long Range | 7-Inch | DJI Air Unit

This iFlight Chimera7 HD quadcopter is a 7 inch, long distance BNF designed to carry large batteries for extended FPV flight times (even up to 6S, 4200mAh). The stiff deadcat frame is designed for minimal resonance and for your props to not show in the footage. 

Equipped with 2806.5 motor and 7 inch propellers for super stable flying and a pre-installed GPS for Betaflight rescue mode. Vertical and horizontal TBS Crossfire antenna mounts are included, as-well as a GoPro universal TPU bottom stand. Australian Stock.

BNF: Parts list (Build)

Prebuilt Quadcopter & tested indoors

  • 1x Chimera7 frame
  • 1x GoPro TPU bottom stand incl. lock screw
  • 1x DJI FPV camera
  • 1x DJI FPV Air Unit Module
  • 2x Albatross LHCP RP-SMA 5.8g 150mm antenna
  • 2 sets x Gemfan tri-blade 7040 props (Set of 4 - Colour may vary)
  • 4x 20*250mm Microfiber PU Leather Battery Strap (Colour May Vary)

Recommended Chimera7 Accessories

FPV Finder-Buzzer Ultralight, self-powered buzzer-alarm to help find your lost Chimera7
Extra 7-Inch
Extra GemFan, 7-Inch tri-blade props for long distance flying on the Chimera7


Fullsend LiPo Battery | 6S | 1800mAh | 120C.
This is the battery we recommend to get the best performance from iFlight's Chimera7 Quad
FPV Backpack The Torvol Quad Pitstop Pro will comfortably fit all your FPV quadcopter accessories


    A basic PID- and Filter tuning has been pre-applied by iFlight.

    FRAME: Chimera7

    • Wheelbase: 320mm
    • Main body dimension: 285*199mm
    • Bottom to top distance: 20mm
    • Arm thickness: 6mm
    • Bottom plate thickness: 3mm
    • Top plate thickness: 2mm
    • Upper(middle) plate thickness: 3mm
    • Camera plate thickness: 3mm (included TPU inserts)

    ELECTRONICS: SucceX-D F7 V2.1 Stack (50A 4-in-1 ESC):

    ESC | SucceX 50A

    • MCU: STM32F051
    • Up tp 48kHz PWM frequency
    • Capacitance: 470uF/50V
    • Current Sensor: Yes
    • Input: 2-6S LIPO
    • Constant: 50A / Burst: 60A
    • BlHeli32 telemetry: Yes
    • BEC: No
    • Supports up to Dshot1200, Proshot, Oneshot, Multishot 
    • Target: iFlight-BL32-4IN1
    • Weight: 14.4g
    • Mounting pattern: 30.5*30.5mm/Φ3mm
    • Dimensions: 43*39mm (including the power pads)


    • 6mm rigid arm design for more stiffness
    • Top- and bottom battery mount option
    • XING 1800KV 2806.5 efficient wide stator motors
    • GPS pre-installed for more safety at distance
    • GoPro TPU bottom stand (GoPro protector not included)
    • 360° TPU protection, DJI cam protection and antenna mounts
    • DJI FPV Air Unit, buttery-smooth 720p\120fps FPV feed (TPU soft mounted) 
    • No props in view (DJI Air unit record in 1080p/60fps)
    • Battery voltage LED status light (illuminated IF logo on the bottom)

    Notify me when this product is available:

    Search XM2 store