Free Australian Shipping Over $99 (Excluding Backpacks)

FPV Cinelifter | iFlight Taurus X8 HD | 6S | V2 | TBS Crossfire Diversity NANO RX | w/ DJI Air Unit

The iFlight Taurus X8 HD V2 is a Cinelifter FPV Drone, engineered for professionals. With the ability to carry heavier camera packages than what is traditionally used for FPV (up to a 2KG camera package) this cine-lift BNF X8 features a soft-damped platform to mount your DSLR or cinema camera (Eg. RED Komodo, Z-Cam, Sony A7SIII or Blackmagic Cinema Camera) and is equipped with DJI's FPV HD transmission system.

The underslung 6S battery is dual-purpose: acting as a power source and also as effective counterweight. Strategically slide and position your battery pack either closer to the front or the back of the quad to counter-balance your camera and lens package.

An adjustable, CNC milled aluminium mount provides secured camera angles between 5 and 35 degrees. The silicon-ball dampened carbon camera base is decoupled from the rest of the frame, reducing the amount of vibration generated by motors and propellers and designed for no camera jello or jittering.

Australian Stock and Free Shipping


- 2kg max payload for various cinema and DSLR cameras
- TBS Crossfire Diversity NANO RX
- DJI Air Unit
- Efficient & Powerful Wide Stator XING 2806.5 Motors
- Redundant ESC and motor configuration
- Stable silicon-ball decoupled camera CNC mount
- GPS flight data and rescue functionality
- Optimized adjustable camera and battery mount


- SucceX-D F7 TwinG V2.1 Stack
- Motor: XING 2806.5 1300KV
- GPS module: iFlight M8Q-5883-- GPS & Compass V2.0
- Wheelbase: 400mm
- Body Size: 283*283mm
- Top and bottom plate spacing: - 20-31mm (aluminium standoff height)
- Propeller size: 8 inch
- Weight: 1572g (without battery)

In the Box

1x Pre-built & tested Taurus X8 quadcopter (TBS Crossfire RX)
1x iFlight Taurus X8 Frame
1x iFlight FPV Battery (6S 70C 4400mAh)
1x DJI FPV Air Unit Module + Camera4 x Albatross LHCP 5.8GHz SMA FPV Antenna
8x HQ Props 8X4X3 propeller (Set of 2- Colour May Vary)
2x iFlight LiPo Strap 20*300mm (Black)
1x Prop Wrench

Flight Controller

FC | SucceX-D F7 TwinG V2.1

MCU: 216MHz STM32F722
Gyro:2x ICM20689
Barometer: YES
Betaflight OSD: YES
BEC: 5V 2.5A / 9V 2.5A
UARTs: 5
Input voltage: Recommended 2-6S, MAX 8S
Firmware Target: IFLIGHT_F722_TWING
Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
Dimensions: 36*36mm
Weight: 7.5g
USB type-C

Electronic Speed Controller

ESC | 2x SucceX 80A 2-8S 4in1

MCU: STM32F051
Up to 48kHz PWM frequency
Capacitance: 470uF/50V
Current Sensor: Yes
Input: 2-8S LIPO
Constant: 80A / Burst: 100A
BlHeli32 telemetry: Yes
Supports up to Dshot600, Proshot, Oneshot, Multishot
Firmware Target: iFlight-BL32-4IN1
Mounting pattern: 30.5*30.5mm/Φ3mm

Search XM2 store