Free Shipping on everything Australia wide (excluding backpacks) when you spend over $99!

Search

Add your deal, information or promotional text

FPV | iFlight ProTek35 HD | 6S | CineWhoop | Caddx Vista Nebula Nano | TBS Crossfire

The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops.

iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with 2203.5 motors. Including TBS Crossfire, the FPV drone also features the Caddx Nebula Nano Digital HD System, Beast F7 AIO Flight Controller, 45A 2-6S ESC, and the Nazgul 3535 propellers.

Australian Stock and Free Shipping.

Features

  • No Props or frame in view
  • TBS Crossfire
  • High-performance True-AIO Board Beast Whoop F7 AIO 45A to save weight and space
  • T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
  • Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
  • Low Resonance frame construction (Less Jello, more Cinematic footage)
  • Nebula Nano Digital HD System
  • Pre-tuned with smooth freestyle settings
  • XING 2205 2300KV (6S)

Pre-Tuned & Pre- Setup

  • Don’t worry about tuning, iFlight did that for you already. A basic PID- and Filter tuning was applied for a great flight experience.

Specs

  • Board Beast Whoop F7 AIO 45A
  • Motor: XING 2205 2300KV (6S)
  • Wheelbase: 151mm
  • Body Size: 118*94.5mmmm
  • Bottom plate thickness: 3.5mm
  • Top plate thickness: 2mm
  • Top and bottom plate spacing: 20mm (aluminum standoff height)
  • Propeller size: 3.5 inch
  • FC pattern: 25.5*25.5mm / 20*20mmmm
  • FPV cam spacing: 20mm
  • Weight: 348.3g (without battery)

FC | Beast F7 AIO

  • MCU: BGA-STM32F745
  • Gyro: MPU6000
  • UARTs: 5
  • Blackbox: 8Mb Onboard Flash
  • BEC output: 5V 2.5A
  • Barometer: BMP280
  • Connector: Micro-USB
  • OSD: AT7456E
  • FC Firmware:IFLIGHT_F745_AIO
  • Mounting pattern: 25.5*25.5mm φ3mm
  • Dimensions: 32.5*32.5mm
  • Weight: 8.5g

ESC | 45A 2-6S

  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Current scale: 200
  • Constant: 45A / Burst: 50A
  • BLHeli: BLHeli-S
  • RPM-Filter ready: Yes (JazzMaverick or JESC firmware)
  • Telemetry: no
  • ESC Firmware: BlheliS G-H-30
  • Mounting pattern: 25.5*25.5mm/Φ3mm
  • Dimensions: 32.5*32.5mm

In the Box

  • 1 x ProTek35 Frame
  • 1 x Caddx Nebula Nano HD System
  • 1 x TPU Bracket for DJI Air Unit Module
  • 1 x TPU Antenna holder for DJI antenna
  • 2 x TPU camera side plate soft mount
  • 2 x Nazgul 3535 propeller (Set of 4)
  • 1 x iFlight LiPo Strap 15*150mm
  • 1 x iFlight LiPo Strap 15*250mm
  • 1 x GoPro TPU bottom stand black (GoPro Protector not included)

Search XM2 store