FPV | iFlight ProTek35 HD | 6S | CineWhoop | Caddx Polar Vista HD | TBS Crossfire | Yellow

The Protek CineWhoop gives you longer flight times and less weight than the previous cinewhoops. Perfect for indoor, cinematic flying.

iFlight was able to increase the FPV Drones speed and thrust by 50% compared to its 3-inch predecessor, equipped with 2203.5 motors, TBS Crossfire, Caddx Polar Cam Digital HD System, Beast F7 AIO Flight Controller, 45A 2-6S ESC, and Nazgul 3535 propellers.

Australian Stock and Free Shipping

Features

• No Props or frame in view
• TBS Crossfire
• High-performance True-AIO Board Beast Whoop F7 AIO 45A to save weight and space
• T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
• Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
• Low Resonance frame construction (Less Jello, more Cinematic footage)
• Caddx Polar Cam Digital HD System
• Pre-tuned with smooth freestyle settings
  
• XING 2205 2300KV (6S)

Pre-Tuned & Pre- Setup

• Don’t worry about tuning, iFlight did that for you already. A basic PID- and Filter tuning was applied for a great flight experience.

Specs

• Board Beast Whoop F7 AIO 45A
• Motor: XING 2205 2300KV (6S)
• Wheelbase: 151mm
• Body Size: 118*94.5mmmm
• Bottom plate thickness: 3.5mm
• Top plate thickness: 2mm
• Top and bottom plate spacing: 20mm (aluminum standoff height)
• Propeller size: 3.5 inch
• FC pattern: 25.5*25.5mm / 20*20mmmm
• FPV cam spacing: 20mm
• Weight: 348.3g (without battery)

FC | Beast F7 AIO

• MCU: BGA-STM32F745
• Gyro: MPU6000
• UARTs: 5
• Blackbox: 8Mb Onboard Flash
• BEC output: 5V 2.5A
• Barometer: BMP280
• Connector: Micro-USB
• OSD: AT7456E
• FC Firmware：IFLIGHT_F745_AIO
• Mounting pattern: 25.5*25.5mm φ3mm
• Dimensions: 32.5*32.5mm
• Weight: 8.5g

ESC | 45A 2-6S

• Current Sensor: Yes
• Input: 2-6S LIPO
• Current scale: 200
• Constant: 45A / Burst: 50A
• BLHeli: BLHeli-S
• RPM-Filter ready: Yes (JazzMaverick or JESC firmware)
• Telemetry: no
• ESC Firmware: BlheliS G-H-30
• Mounting pattern: 25.5*25.5mm/Φ3mm
• Dimensions: 32.5*32.5mm

In the Box

• 1 x ProTek35 Frame (Yellow or Grey)
• 1 x Caddx Polar Cam Digital HD System
• 1 x TPU Bracket for DJI Air Unit Module
• 1 x TPU Antenna holder for DJI antenna
• 2 x TPU camera side plate soft mount
• 2 x Nazgul 3535 propeller (Set of 4)
• 1 x iFlight LiPo Strap 15*150mm
• 1 x iFlight LiPo Strap 15*250mm
• 1 x GoPro TPU bottom stand black (GoPro Protector not included)