Free Australian Shipping Over $99 (Excluding Backpacks)

BNF FPV | iFlight Evoque F5D | 6S | 5-Inch | Deadcat | Caddx Vista | TBS Crossfire | LED Edition

The F5D Nazgul Evoque is a large 5-Inch FPV Drone from iFlight, using 5-inch props, and a Deadcat frame layout.

Optimised for cinematic flying, the Nazgul Evoque F5D doesn't show the drones propellers in your action cam footage.

Designed for attaching your GoPro or Insta360 and capturing smooth, cinematic footage; the Nazgul Evoque F5D also has upgraded side-panels to keep the dirt and grass away from your internal components, and the XT60 connector is built into frame. Having the XT60 connector externally positioned is safer for the pilot and your props won't cut into your XT60 cable.

iFlight's Nazgul Evoque F5X is optimised  for FPV freestyle flying and available here.

Australian Stock & Free Shipping


Nazgul evoque iflgiht fpv drone

XING2 Performance Motors

7075 aluminium bell, 5mm titanium alloy shaft, NSK durable bearings, Centre slotted magnets for better response and lower air gaps for a higher magnetic flux with increased performance and efficiency. The XING damping ring between the bell and bearing to increase durability and smoothen out your flights.

LED Lights

360-degree illumination for day and night. The bottom light indicates battery voltage, a quick check gives you a hint of the voltage still remaining; Never lift off with an empty battery again. Installed LED wires in the side panels and the bottom of the arms are also illuminated.

Digital HD Experience - Caddx HD System

Equipped with the DJI Digital FPV system with 50mBit transmission for 720P video feed on your DJI FPV Goggles. The iFlight Evoque uses the Caddx Vista HD system and offers better image quality than other video systems - better performance and more detailed shadows. 


  • Side panels to prevent grass and dirt getting into electronics
  • TBS crossfire
  • Caddx Vista, with original camera
  • LEDs for night flying
  • 5-Inch frame for reliable freestyle flying


  • Total Dimensions: 136*190mm (body dimension)
  • Caddx Vista HD Original Camera
  • TBS Crossfire
  • Geometry: Dead Cat Frame (F5D)
  • Bottom to top distance: 28mm
  • Arm Thickness: 6mm
  • Bottom plate thickness: 3mm
  • Top plate thickness: 3mm
  • Upper (middle) plate thickness: 3mm
  • XING2 2207 1855KV motors
  • Nazgul F5 propellers
  • Weight: 412g (without battery and GoPro mount)


  • BlackBox: 16MB
  • DJI Air Unit Plug-and-Play. No need to solder.
  • BAT, +5V, 3.3, Start indicator
  • With LC Filter.
  • MCU:STM32 F722
  • Gyro:MPU6000
  • Betaflight OSD:IFLIGHT OSD (AT7456E)
  • Blackbox:16MB
  • 5x Uarts
  • 4x Dshot/PWMoutputs
  • 1x I2C
  • 1x SH1.0 9pin connector for HD VTX (5V/BAT/G/VO/T1/R1 /5V/G/VI)
  • 1x SH1.0 8pin connector for ESC(R6/CUR/M4/M3/M2/M1/BAT/G)
  • 1x SH1.0 6pin connector for Any Receiver or DJI(3V3/R2i/5V /G/R2/T2)
  • 1x SH1.0 4Pin connector GPS (T4/R4/G/5V)
  • 1x SH1.0 4Pin connector LED&Beeper (BUZ/LED/G/5V)

ESC // BLITZ Mini 55A  

  • Dimension: 35*42mm
  • Mounting Holes: 20*20mm/Φ4mm
  • Weight: 11.3g
  • Supports 2-6S lipo input
  • MCU:G071
  • Constant: 55 Amps
  • Burst: 60 Amps
  • Current sensor: Yes
  • BEC: No
  • Current rate: 100
  • Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
  • Firmware: BLHeli 32

In the Box

  • 1 x Nazgul Evoque F5D drone (DC pattern)
  • 4 x Nazgul F5 Prop
  • 2 sets of Battery Pads
  • 4 x Battery straps
  • 1 x Screws bag


  • August 2021: The color of 915 antenna mount changed from green to black, change the foam inner packaging to blister material.
  • August 2021: Before two antennas changed to one.
  • October 23, 2021: Before Polar Caddx Vista changed to DJI Camera Vista.
  • October 2021: Before SucceX-E mini F7 Stack(F7+45AESC) changed to BLITZ MINI (F7+BLITZ E55 4-in-1 ESC)
  • November 2021: TPU colour is random, you may receive yellow, pink, tiffany blue, green, or blackish green.

Search XM2 store