BNF FPV | iFlight ProTek35 HD | 4S | CineWhoop | Caddx Vista Nebula Nano | TBS Crossfire

The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops.

iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with 2203.5 motors. Including TBS Crossfire, the FPV drone also features the Caddx Nebula Nano Digital HD System, Beast F7 AIO Flight Controller, 45A 2-6S ESC, and the Nazgul 3535 propellers. Australian Stock

Features

• No Props or frame in view
• TBS Crossfire
• High-performance True-AIO Board Beast Whoop F7 AIO 45A to save weight and space
• T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
• Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
• Low Resonance frame construction (Less Jello, more Cinematic footage)
• Nebula Nano Digital HD System
• Butter smooth 2203.5 3600KV (4S)
• Pre-tuned with smooth freestyle settings

Pre-Tuned & Pre- Setup

• Don’t worry about tuning, iFlight did that for you already. A basic PID- and Filter tuning was applied for a great flight experience.

Specs

• Board Beast Whoop F7 AIO 45A
• Motor: XING 2203.5 3600KV (4S)
• Wheelbase: 151mm
• Body Size: 118*94.5mmmm
• Bottom plate thickness: 3.5mm
• Top plate thickness: 2mm
• Top and bottom plate spacing: 20mm (aluminium standoff height)
• Propeller size: 3.5 inch
• FC pattern: 25.5*25.5mm / 20*20mmmm
• FPV cam spacing: 20mm
• Weight: 348.3g (without battery)

FC | Beast F7 AIO

• MCU: BGA-STM32F745
• Gyro: MPU6000
• UARTs: 5
• Blackbox: 8Mb Onboard Flash
• BEC output: 5V 2.5A
• Barometer: BMP280
• Connector: Micro-USB
• OSD: AT7456E
• FC Firmware：IFLIGHT_F745_AIO
• Mounting pattern: 25.5*25.5mm φ3mm
• Dimensions: 32.5*32.5mm
• Weight: 8.5g

ESC | 45A 2-6S

• Current Sensor: Yes
• Input: 2-6S LIPO
• Current scale: 200
• Constant: 45A / Burst: 50A
• BLHeli: BLHeli-S
• RPM-Filter ready: Yes (JazzMaverick or JESC firmware)
• Telemetry: no
• ESC Firmware: BlheliS G-H-30
• Mounting pattern: 25.5*25.5mm/Φ3mm
• Dimensions: 32.5*32.5mm

In the Box

• 1 x ProTek35 Frame
• 1 x Caddx Nebula Nano HD System
• 1 x TPU Bracket for DJI Air Unit Module
• 1 x TPU Antenna holder for DJI antenna
• 2 x TPU camera side plate soft mount
• 2 x Nazgul 3535 propeller (Set of 4)
• 1 x iFlight LiPo Strap 15*150mm
• 1 x iFlight LiPo Strap 15*250mm
• 1 x GoPro TPU bottom stand black (GoPro Protector not included)