Waterproof Coating | FPV + Drone | Clear/Transparent | KOTKING | 15ML

This coating creates a protective barrier around your electronics and protects your drone or FPV quadcopter from rain, dust, mud, snow and anything wet. It does this while allowing heat to dissipate. Not only is Kotking water resistant, but it's also heat resistant, so it won't melt of your ESCs. If properly correctly, Kotking will protect your expensive electronics from the elements.

Specs

• Colour: Clear/Transparent
• Size: 15mL
• Material: Silicone based
• Brand: Kotking

How To Apply Kotking Coating

1. Dissemble your FPV drone to easily apply a KOTKING coating. Do not unsolder.
2. Clean all surfaces with air blower, brush, or cloth to avoid dust, oil or moisture.
3. Apply Kotking to all components: flight controller, VTX, camera boards etc evenly and slowly you can use a tiny brush or wood stick provided to make it even.
4. Place components in a balanced position and allow to dry for 20 mins.
5. Once dry, do the same for the other side of the components.
6. To coat your FPV camera, you can apply KOTKING on your camera connector and camera case (especially the connection between case and FPV camera focus ring).

Note

• One tube contains 15ml of liquid coating weighs 30 grams and is sufficient to fully coat one 5inch FPV setup.
• Please coat Kotking on one-side of your quad and once it dries, you can coat the other side.

In the Box

• 1 x KotKing RC Coating
• 1 x Applicator brush
• 1 x Wood applicator stick