Free shipping on everything Australia wide (excluding backpacks) when you spend over $99!

Search

Add your deal, information or promotional text

BNF FPV | iFlight TITAN XL5 HD | 5 Inch | 4S or 6S | w/ DJI HD Air Unit

Featuring 'true x' frame, iFlight's Titan XL5 4S BNF quad is equipped with DJI's HD Air Unit for on-board recording, iFlight's latest SucceX-D F7 Stack, durable XING motors and super durable 6mm arms for maximum freestyle ability.

If your Titan XL5 ever loses signal, GPS is pre-installed for a return home, fail-safe rescue option.

DJI's HD Air Unit system has set the FPV bar for high clarity and image quality with 720p video shown at 120fps through the goggles.

The Titan XL5 prioritises freestyle flying over cinematic output. The 'True X frame' means propellers will likely be in view of the camera, prioritising freestyle flips, rolls and experiential flying over future image playback.

Because of this, XM2 recommends Ethix S5 props. The light grey colour of the Ethix S5 propeller is harder to notice in your footage and the high pitch angle of the prop can handle the heavier XL5 quadcopter.



Recommended Titan XL5 Add-ons (4s Version):
LiPo Battery: 4S | 1550mAh | 120C | XT60 | FULLSEND
Propellers: 5 Inch | S5 | Light Grey Props | ETHIX
FPV tool: Propeller Multi-Tool | Ethix 

Pre-Tuned & Pre-Setup:

  • Don't worry about tuning, iflight did that for you already. A basic PID- and Filter tuning applied for a great flight experience.
  • GPS-rescue mode is configured and just needs to be enabled in your Betaflight Configurator! (Please be aware of how it works before you use it)
  • Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess.
  • Motor Power is configured to 70% throttle limit (scaled) by default to give more throttle stick resolution for an easy start on the 6S 1800kv version. Need more Power? Just enable 100% in the Betaflight Configurator to unleash the Beast.

FRAME | TITAN XL5:

  • Weight: 145g
  • Wheelbase: 250mm
  • Main body dimension: 185*133mm
  • Bottom to top distance: 30mm
  • Arm thickness: 6mm
  • Bottom plate thickness: 2mm
  • Top plate thickness: 2mm
  • Camera plate thickness: 2mm (2.5mm included TPU inserts) 

Electronics | SucceX-D F7 Stack (50A 4-in-1 ESC):

  • Universal USB Type C connector instead of micro USB
  • Plug-and-Play DJI support. No need to solder.

SucceX-D F7

  • with 216MHz STM32F722 with 2x ICM20689 Gyros ready for SensorFusion.
  • Up to 8S, Barometer, 32MB Blackbox Flash and 5V/9V to power all you might need.

SucceX 50A 4in1

  • with BLHeli_32 up to 48kHz, 8 layers double-sided PCB and Top grade Mosfets.

BNF | Parts list (Build)

  • 1x TITAN XL5 HD Frame
  • 1x DJI FPV Camera
  • 1x DJI FPV Air Unit Module
  • 2x DJI FPV Air Unit Antenna SMA
  • 1x TPU Bracket for DJI Air Unit Module
  • 1x TPU Antenna holder for DJI antenna
  • 2x TPU camera side plate soft mount
  • 1x TPU lens cover
  • 1x iFlight Lipo Strap 
  • 2x Nazgul 5140 Propeller (Set of 4 - Colour May Vary)
  • 4x XING 2208 Motor Unibell(4S 2450KV,6S 1800KV)
  • 1x SucceX-D F7 Flight Controller
  • 1x SucceX BLHeli32 50A 4-in-1 ESC 2-6S
  • 2x MMCX to RP-SMA Female Adapter Cable
  • 1x GPS Module

HIGHLIGHTS:

  • 6mm arm design for more durability
  • XING 2208 motors for more power
  • GPS pre-installed for more safety at distance
  • Variable GoPro TPU mount (supports ND-Filter inserts)
  • 360° TPU protection and Antenna mounts



Search XM2 store