Free Australian Shipping Over $99 (Excluding Backpacks)

FPV Cinelifter | iFlight Protek60 Pro HD | 6S | TBS Crossfire | w/ Caddx Air Unit (DJI Version)

Protek60 cinelifter iflight xm2 store bmpcc

Features

  • Up to 110 km/h flight speed
  • Universal Mount (BMPCC, DSLR, Etc)
  • 1.5 kg payload
  • Total lift off weight up 3.5 kg - recommended maximum take-off weight (MTOW)
  • Guarded Propellers for indoor & outdoor use
  • TBS Crossfire Installed
  • Universal Camera Mount option for a wide range of camera compatibility
  • iFlight ESC Commander PCB // Power distribution board with high capacitance & heat dissipation
  • Single X-Class grade ESC motor drivers for extended power & reliability
  • Large XING2 3110 powerful motors with extreme lift & flight performance
  • GPS module pre-installed (BF GPS rescue or INAV GPS RTH feature available)

Protek60 Pro Specs

Protek60 Pro | BNF | TBS Crossfire | Caddx Air Unit (DJI Version)

Specs

  • BLITZ F7 Flight Controller
  • SucceX X80A X-Class ESC 
  • Motors: XING2 3110 1600KV
  • GPS module: iFlight M8Q-5883-GPS & Compass V2.0
  • Wheelbase: 282mm
  • Body Size: 380 x 351mm
  • Top & bottom plate spacing: 35mm (aluminium standoff height) 
  • Propeller size: 6 inch
  • Weight: 1330g (without battery)

protek60 iflight cinelifter xm2 store melbourne

Flight Controller : BLITZ F7

  • MCU: STM32 F722
  • Gyro: MPU6000
  • Baro: NO
  • OSD: AT7456EBEC: 5V 2.5A
  • BlackBox: 32MB
  • UARTs: 6 
  • Smart Audio / IRC Tramp VTX protocol supported
  • WS2812 LED Strip: Yes
  • Beeper: Yes
  • Firmware Target: IFRC-IFLIGHT_BLITZ_F722
  • Mounting pattern: 30.5 x 30.5mm/φ4
  • Dimensions: 36.5 x 35mm
  • Weight: 7.8g

ProTek60 Pro HD 6S Cinelifter

Electronic Speed Controller : iFlight ESC Commander PCB (4x SucceX X80A)

  • MCU: G071
  • Capacitance per ESC: total 240UF Low ESR
  • Current Sensor: Yes
  • Input: 2-8S LiPo
  • BlHeli32 telemetry: Yes
  • BEC: No
  • Supports up to DShot DShot150/300/600/1200/MultiShot/OneShot PWM Drive
  • Firmware Target: iFlight-BL32-PRO
  • Weight: 8.1g
  • Dimension: 40 x 17mm
iflight protek60 cinelifter rental xm2 store

In the Box

  • Pre-built and tested ProTek60 Pro Drone
  • 1 x Fullsend X 6S 70C 4400mAh Battery
  • 1 x DJI FPV Air Unit Module + Camera
  • 2 x Albatross LHCP 5.8GHz 100mm SMA FPV Antenna
  • 4 x 6 x 4 x 3 Propellers
  • 2 x iFlight LiPo Strap 20 x 295mm (Black)
  • 1 x Battery Quick Mount
  • 1 x Prop Wrench
  • 1 x XT90 Male to XT60 Female Adapter Wire

Search XM2 store